C B M Industrie Private Limited

The 3M road stud is a type of road safety device manufactured by the company 3M. It is designed to enhance road visibility, especially during nighttime or low light conditions.

3M™ Flexible Median Markers have been designed with a unique ‘bounce-back’ feature to be vandal and breakage resistant. And Retroreflective Property to mark the pavements and medians.

Minimum order quantity: 500 Piece

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Minimum order quantity: 500 Piece

3M ILC Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

3M ILC Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night

Minimum order quantity: 5000 Piece

We have marked a distinct position in the market by providing high quality 3M Moulded Shank RPM. Mainly used in national and state highways. These studs can withstand high loads and are more durable than the regular studs.

Minimum order quantity: 500 Piece

Supplying and fixing of reflective road studs moulded out of ASA or HIPS or ABS  or any other suitable material approved by the Engineer with  reflective panels consisting of number of lenses containing single or dual prismatic cube capable of providing total internal reflection of light entering the lens face. The road stud width shall not exceed 130mm and height shall be not less than 10 mm and not exceeding 20mm. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The slope of the

Minimum order quantity: 500 Piece

3M™ Flexible Median Markers have been designed with a unique ‘bounce-back’ feature to be vandal and breakage resistant. And Retroreflective Property to mark the pavements and medians

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

These Delineators are used widely on roads where there are no railings & acts as a prevention of accidents & also on medians where there is crossings 

Minimum order quantity: 500 Piece

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

Minimum order quantity: 500 Piece

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

Minimum order quantity: 500 Piece

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

Providing and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular share, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20,000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilograms. Fixing will be done by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. The solar raised pavement markers shall be tested for Compression strength of 20000 Kg, IP 65 rating, Blinking frequency from government lab (CRRI/ARAI/ICAT/CPRI) as per requirement of MoRTH and Report shall be uploaded while quoting the tender.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night

Minimum order quantity: 500 Piece

We are engaged in offering a wide range of Solar Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Minimum order quantity: 500 Piece

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Minimum order quantity: 500 Piece

These Delineators are used widely on roads where there are no railings & acts as a prevention of accidents & also on medians where there is crossings 

Minimum order quantity: 500 Piece

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Minimum order quantity: 500 Piece

3M ILC Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

These Delineators are used widely on roads where there are no railings & acts as a prevention of accidents & also on medians where there is crossings 

Minimum order quantity: 500 Piece

These Delineators are used widely on roads where there are no railings & acts as a prevention of accidents & also on medians where there is crossings 

Minimum order quantity: 500 Piece

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

Flexible Median Marker is highly visible at night and in rainy conditions. Tough, impact-resistant bodies with fluorescent diamond grade prismatic sheeting ensuring long-lasting performance.
. The "flame" shape retro-reflective surface offers unparalleled visibility. While the single shank simplifies application, increases productivity and reduces cost.Benefits:
Improves Road Safety
Increases Night Time Vision
Emphasises Lane Definition

Minimum order quantity: 500 Piece

3M ILC Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

3M has provided some of the leading traffic safety solutions around the world. Retroreflective technology is one of them, and was pioneered for development by 3M some 80 years ago. As the technology advanced over the years, international road safety standards for urban, rural and highway roads have also changed to embrace the higher light return efficiency of newer retroreflective materials.

Minimum order quantity: 500 Piece

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Minimum order quantity: 10 Piece

We are engaged in manufacturing and supplying a qualitative range of Traffic Sign Boards. These signs are designed in accordance with the NH standards and norms. We manufacture these signs from retro Reflective sheets that consist of microscopic lens. These signs are a perfect way of managing the traffic and avoiding violation of traffic rules.