Abs Road Studd

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

Category A road studs as per tt/oRTH specification High retro-reflectivity performance for wide range of observation angles Excellent nighttime visibility Sustained product performance over longer period 4X more reflective than minimum requirements as per ASTIV D4280 & IVoRTH specifications 1.5X more csmpressive strength than minimum requirement as per truloRTH specification

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 85 / PieceGet Latest Price

Product BrochureProduct Details:

3M™ Raised Pavement Markers are highly visible at night and in rainy conditions. Tough, impact-resistant bodies and abrasion-resistant lenses ensure long-lasting performance and durability.

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

3M Molded Shank Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients

Approx. Rs 1,375 / PieceGet Latest Price

Product BrochureProduct Details:

Providing and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular share, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20,000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilograms. Fixing will be done by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. The solar raised pavement markers shall be tested for Compression strength of 20000 Kg, IP 65 rating, Blinking frequency from government lab (CRRI/ARAI/ICAT/CPRI) as per requirement of MoRTH and Report shall be uploaded while quoting the tender.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 1,375 / PieceGet Latest Price

Product BrochureProduct Details:

Providing and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular share, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20,000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilograms. Fixing will be done by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. The solar raised pavement markers shall be tested for Compression strength of 20000 Kg, IP 65 rating, Blinking frequency from government lab (CRRI/ARAI/ICAT/CPRI) as per requirement of MoRTH and Report shall be uploaded while quoting the tender.

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

The  twin moulded shank raised pavement marker or plastic glow road studs reflectors are extremely durables device providing day and night visibility in adverse weather conditions. These are reflectorized, i.e., reflect light from vehicle's headlights back to driver's eye.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

3M ILC Road Studs are best to be used on centre line of highways & roads for long life & better visibility at night.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

3M ILC Road Stud Non Shank* Category A road studs are per MoRTH specification* High retro-reflectivity performance for wide range of observation angles* Excellent nighttime visibility* Sustained product performance over longer period* 4X more reflective than minimum requirements as per ASTM D4280 & MoRTH specifications* 1.5X more compressive strength than minimum requirement as per MoRTH specificatio

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

The twin moulded shank raised pavement marker or plastic glow road studs reflectors are extremely durables device providing day and night visibility in adverse weather conditions. These are reflectorized, i.e., reflect light from vehicle's headlights back to driver's eye.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We offer supreme quality Plastic Road Stud as per the needs and specifications of the client.Our products are highly durable and can be clearly visible during the night and in adverse situations like fog, dense smoke etc. these road studs are simply like reflectors with a long period of response which means that it reflects the light from the headlight of a vehicle back to the driver’s eye.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We offer supreme quality Plastic Road Stud as per the needs and specifications of the client.Our products are highly durable and can be clearly visible during the night and in adverse situations like fog, dense smoke etc. these road studs are simply like reflectors with a long period of response which means that it reflects the light from the headlight of a vehicle back to the driver’s eye.

Approx. Rs 125 / PieceGet Latest Price

Product BrochureProduct Details:

The twin moulded shank raised pavement marker or plastic glow road studs reflectors are extremely durables device providing day and night visibility in adverse weather conditions. These are reflectorized, i.e., reflect light from vehicle's headlights back to driver's eye.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering a wide range of 3M Plastic Road Stud to our clients. Our range of all products is widely appreciated by our clients.